CableLabs wrapped up another round of DOCSIS® 4.0 security testing last month, and this time, we went further than planned. At our 19th DOCSIS 4.0 Interop·Labs event, held Oct. 26–29, 2026, participants confirmed that Baseline Privacy Interface Plus Version 2 (BPI+ V2) works across vendors, then completed deeper validation and testing new security capabilities beyond the original plan.
The event included participation from three Converged Cable Access Platform (CCAP) core suppliers, five Remote PHY Device (RPD) manufacturers, eight cable modem suppliers and two chipset manufacturers. We completed all three planned security objectives and expanded into additional DOCSIS 4.0 security testing. Successful completion of these objectives demonstrated continued progress in validating BPI+ V2 security across the multivendor ecosystem.
We also explored additional DOCSIS 4.0 security capabilities beyond the original scope of the interop — specifically, Early Authentication and Encryption (EAE) and Trust on First Use (TOFU) testing.
Three BPI+ V2 Security Objectives Completed
BPI+ V2 combines modern certificate-based authentication, ephemeral key exchange and traffic encryption. At October’s Interop·Labs event, we successfully completed all three planned security objectives, building on previous interoperability milestones and validating these capabilities in greater depth:
- A complete handshake with production certificates. We completed the full BPI+ V2 authorization exchange using production certificates, rather than just lab test certificates. This verifies the proper handling of the certificate chains intended for deployment and adds confidence to real-world interoperability.
- Five Elliptic Curve Diffie-Hellman Ephemeral (ECDHE) groups. We also successfully tested the use of all five specified ECDHE groups in BPI+ V2. ECDHE is a key-exchange method that lets two devices establish a shared secret over an untrusted connection, using temporary private keys generated fresh for each exchange. Because those temporary keys are discarded afterward, ECDHE enables perfect forward secrecy (PFS), meaning past sessions stay protected even if a long-term key is later compromised.
- AES-128 and AES-256 encryption. AES-128 is mandatory for BPI+ V2 and was validated across all participating core-and-modem pairings. AES-256 is optional and was confirmed on a chipset. These results demonstrate that the ecosystem is meeting mandatory encryption requirements while making progress toward supporting optional security enhancements.
Beyond the Interop Test Plans: EAE and TOFU
Testing expanded beyond the original objectives as we began EAE interoperability testing and successfully demonstrated TOFU in a lab setup:
- EAE for BPI+ V2. We used a new core implementation of EAE for BPI+ V2 against a subset of DOCSIS 4.0 cable modems. EAE is a network-controlled feature designed to enable authentication and encryption earlier in modem initialization, specifically after ranging, to help protect IP provisioning traffic. Initial testing provided valuable insights and established a foundation for continued testing at future interop events.
- TOFU. Using a DOCSIS 4.0 cable modem and lab equipment, we successfully validated BPI+ downgrade protection, which prevents the protocol from being able to go back to an earlier, weaker version of the protocol. Testing confirmed the expected behavior: The modem first completed BPI+ V1, then completed BPI+ V2; any further attempts to revert to BPI+ V1 were rejected, with only BPI+ V2 being allowed. Future testing will seek to further validate proper execution of reset procedures and interoperability across vendor implementations.
Why These Security Capabilities Matter
DOCSIS 4.0 technology introduces real improvements to how devices authenticate and encrypt traffic, but those protections only matter if they work the same way across every vendor’s equipment. The technology builds on existing security protections by introducing capabilities that strengthen authentication, encryption and resilience against emerging threats. From providing perfect forward secrecy and protecting against protocol downgrade attempts to supporting stronger encryption options such as AES-256, these advancements help strengthen broadband security across the network.
Completing the event’s main objectives was a big win, and the additional EAE and TOFU testing was a highlight of the week.
With new implementations available for testing and valuable results to build upon, CableLabs and our member and vendor communities will continue advancing these capabilities at future Interop·Labs events, expanding interoperability testing and strengthening DOCSIS 4.0 security across the ecosystem.
The Ecosystem in the Lab
The October event brought together independently developed equipment and firmware from a broad range of suppliers:
- CCAP cores: Aurora Networks, Harmonic and Vecima Networks — all supporting BPI+ V2
- Remote PHY Devices (RPDs): Aurora Networks, Calian, Harmonic, Teleste and Vecima Networks
- Cable modems: Arcadyan, Askey, Gemtek, Hitron, Sagemcom, Ubee Interactive, Vantiva and WNC — all with multiple models supporting BPI+ V2
- Chipmakers: Broadcom and MaxLinear, providing engineering support
With all three primary objectives completed and EAE and TOFU testing under way, the October interop provided both measurable progress and a clear set of next interoperability tests. Future events can build on these results with broader cross-vendor coverage and additional validation of security behavior.
Continuing the Security Work in 2027
We’re hosting the next DOCSIS 4.0 Interop·Labs event the week of Feb. 22, 2027. If you’re a CableLabs member or part of the vendor community, join us and take part in the next round of progress firsthand.
The discussions shaping broadband’s next chapter will continue at CableLabs Tech Summit 2027, April 13–15 in Westminster, Colorado. Building on the industry’s shared Technology Vision, the event brings CableLabs members, vendors and technical experts together to examine emerging capabilities, exchange practical insights and explore the technologies supporting more reliable, adaptive networks. More information, including agenda details and speaker announcements, is coming soon.
If you work on DOCSIS 4.0 technologies — as an operator or vendor — we’d like to see you in 2027!

